Aeroflex Aerocoat Plastic Paint White 946ml
Aeroflex Aerocoat Plastic Paint White 946ml
Aerocoat is a water-based pure acrylic emulsion paint formulated by Aeroflex for their own EPDM closed-cell insulation. Brushed or rolled over exposed pipe and duct insulation it forms a flexible, permanently bonded shield against ultraviolet light and weathering — the two things that break elastomeric foam down when it is left uncovered.
What makes it work on insulation rather than just any coating is elongation. Aerocoat stretches more than 400%, so when the foam is squeezed, compressed or moves with the pipe, the film moves with it instead of cracking or peeling. It also carries a fungus inhibitor and needs no primer.
This is the 946 ml can (1/4 US gallon) in white — the size for fitting covers, valves, short exposed runs and making good after the main job. At the published rate of approximately 10 m² per litre per coat it covers around 9.5 m² in one coat, or roughly 4.7 m² finished at the recommended two.
White is the usual choice on chilled water, refrigeration and air conditioning services where a reflective finish helps, and on any installation that has to look clean. Aerocoat is also widely used as a colour-coding coat so different pipe functions can be identified at a glance.
Thin with clean water, stir thoroughly, apply to a clean surface free of oil, grease and chalking. Cleans up with water. Read the Safety Data Sheet before use.
(AIRPAINT-WHITE-946ML)
| Product | Aeroflex Aerocoat pure acrylic emulsion paint |
|---|---|
| Colour | White |
| Pack size | 946 ml (1/4 US gallon) can |
| Coverage per can | Approx. 9.5 m² per coat — about 4.7 m² finished at two coats |
| Type | Pure acrylic emulsion paint (water-based) |
| Manufacturer | Aeroflex Co., Ltd. (Thailand) |
| Coverage | Approx. 10 m² per litre per coat |
| Coats recommended | 2–3 |
| Primer | Not required |
| Dilution | Clean water, 5–10% by volume. Stir thoroughly before use |
| Application | Brush or roller |
| Surface preparation | Clean and free of oil, grease and contaminants. Remove as much old paint as possible. Surface must not be chalky |
| Touch dry | 20–30 minutes at 25°C, 70% RH |
| Recoat interval | Allow at least 2–3 hours between coats |
| Elongation | More than 400% |
| Specific gravity | 1.10 – 1.30 |
| Viscosity | 95 – 105 KU at 25°C |
| Flexibility | Excellent |
| Flammability | Self-extinguishing |
| UV and fungus resistance | Excellent |
| Weather resistance | Excellent |
| Clean-up | Water |
| Storage | Above 0°C, avoid freezing. Keep container tightly closed. Do not keep diluted material longer than 5 days |
| Expected service life | More than 10 years |
| Safety | Classified under GHS. Signal word: WARNING. Causes mild skin irritation and eye irritation; may cause an allergic skin reaction; harmful to aquatic life. Wear gloves and eye protection. Read the Safety Data Sheet before use. |
| SKU | AIRPAINT-WHITE-946ML |
| Brand | Aeroflex |
| Unit Of Measure | Each |
- Water-based pure acrylic emulsion made specifically for Aeroflex insulation
- Protects exposed insulation from UV, weathering and fungal growth
- Over 400% elongation — flexes with the foam instead of cracking when it is squeezed or compressed
- 946 ml can — covers approx. 9.5 m² per coat
- Sized for fitting covers, valves, short runs and touch-up work
- No primer required; brush or roller straight on after thinning 5–10% with water
- Touch dry in 20–30 minutes, second coat after 2–3 hours
- Self-extinguishing, cleans up with water
- Manufacturer-rated for more than 10 years of service, indoors or out
- Reflective white finish, also used for pipe-function colour coding
Be The First To Review This Product!
Help other Australian Sun Energy Pty Ltd users shop smarter by writing reviews for products you have purchased.
